Tricon Office Module

The Tricon Office Module is a modified standard Tricon I equipped with a 110V single phase electrical system, pre-wired for telephone and CAT5 cabling. The office module can easily serve the needs of one to two personnel in a deployed environment.

The office is equipped with a commercial-grade environmental control unit for heating and cooling, which is shipped inside the Office Module and easily installed onsite.

Features Include:

  • All steel monocoque construction
  • Three-way forklift pockets
  • Full-width access doors on one side of container
  • Over 5.5 tons (12,000 pounds) payload capacity
  • ISO tested and CSC approved by Lloyds for use in the 20' module configuration
  • Over 9.6 cubic meters (346 cubic feet) of internal capacity
  • Easily repaired (essentially same construction as a 20'/40' steel container)
  • 1 Year Warranty on Materials and Workmanship
  • 5 to 20 Year Anti-Corrosion Warranty
  • Standard 36 inch wide personnel door installed in the side with lockable hardware
  • Insulated to R13
  • 5 Year Warranty on paint coatings
  • Available in SeaCool™ Thermal coatings for reduced heat loading
Dimensions
External
Length 2438 mm 8'- 0"
Width 1968 mm 6'- 5 1/2"
Height 2438 mm 8'- 0"
Internal
Length 2299 mm 7'- 6 1/2"
Height 2262 mm 7'- 5 1/64"
Volume 9.79 cu.mt 345.6 cu.ft
Doors
Door opening width 1874 mm 6'- 1 3/4"
Door opening height 2164 mm 7'- 1 3/16"
Weight
Maximum gross 6759 kg 14900 lb
Tare 1180 kg 2600 lb
Payload 5579 kg 12300 lb
Fork pockets
Height 115 mm 4' 17/32"
Width 356 mm 1'- 2 1/64"
Centers 902 mm 2'-11 1/2"
CMCI is ISO 9001:2008 certified  |  © 2011 Kratos Company, All Rights Reserved.
Site Map