CMCI’s ISO Type 3 container meets or exceeds all US Army specifications and first article test requirements for this container type. Built in the USA, this container complies with all Buy America Trades Act requirements as specified by the Department of Defense and General Services Admininstration (GSA). These containers are available via national stock number or part number on various pre-negotiated government contracts.
Features include:
- All CORTEN steel monocoque construction with internal treated wood floors
- Fork-lift pockets
- 8 - 4000lb articulated lashing points in the floor and 8 corresponding fixed lashing
points along the top side rails
- Full-width access doors
- Developed for military cargo
- ISO tested and CSC approved by Lloyds (LRNA), and fully compliant with USCR CFR 49 Chapter 4 Parts 450-453
- Over 1000 cubic feet of internal capacity
- Chemical Agent Resistant Coating (CARC), 20 year limited warranty
| Dimensions |
|---|
| External |
|---|
| Length | 6,058 mm | 19’- 10.5" |
|---|
| Width | 2,438 mm | 8’ |
|---|
| Height | 2,591 mm | 8’- 6” |
|---|
| Internal |
|---|
| Length | 5,898 mm | 19’ – 4.188” |
|---|
| Width | 2,352 mm | 7’ – 8.56” |
|---|
| Height | 2,389 mm | 7'- 4.063" |
|---|
| Volume | 31cu.mt | 1,095 cu.ft |
|---|
| Doors |
|---|
| End door opening width | 2,340mm | 7-’ 8.125” |
|---|
| Side door opening width | 2,340mm | 7'- 8.125" |
|---|
| Door opening height | 2,286 mm | 7’ – 6” |
|---|
| Weight |
|---|
| Maximum gross | 24,000 kg | 52,910 lb |
|---|
| Tare | 2,300 kg | 3,274 lbs |
|---|
| Payload | 21,700 kg | 47,840 lb |
|---|
| Fork pockets |
|---|
| Height | 115 mm | 4.45” |
|---|
| Width | 360 mm | 1’ – 2.17” |
|---|
| Centers | 2050 mm | 2’ – 11.5" |
|---|
Download Type 3 Brochure
You will need Adobe Acrobat Reader to view the brochure. If you do not have it you
can download it for free by clicking
here.
